43–51 mm R25/R32 Ballistic Button Bit for Mining
- Size43–51 mm (1.69–2.01 in); source pairings include 38R25 and 45R32
- ConnectionR25 or R32 by verified model
Drill Bits
Product Categories
All Drill Bits
130 mm CIR110 Ball-Tooth DTH Bit for Water Wells
- Size130 mm (5.12 in); CIR110 hammer family
- ConnectionCIR110 DTH shank family
46–100 mm Cold-Pressed Button Bit for Mining
- Size46–100 mm (1.81–3.94 in)
- ConnectionNot stated; size-specific thread or shank required
90 mm DTH Button Bit for Mining and Water Wells
- Size90 mm (3.54 in)
- ConnectionDTH hammer shank not stated
64–127 mm Multi-Thread Button Bit for Ballast Drilling
- Size64–127 mm (2.52–5.00 in); R32/T38/T45/T51/GT60/ST58 family
- ConnectionR32, T38, T45, T51, GT60, or ST58 as verified by model
40–42 mm Four-Tooth Tapered Button Bit for Mining
- Size40–42 mm (1.57–1.65 in)
- ConnectionTapered connection; standard not stated
38 mm Four-Tooth Ballistic Button Bit for Rock Mining
- Size38 mm (1.50 in)
- ConnectionNot stated; verify thread or taper
38 mm Carbide Ball-Tooth Button Bit for Mining
- Size38 mm (1.50 in)
- ConnectionNot stated; verify the mating rod or shank
38–40mm Ball-Tooth Anchor Bit for Well Completion
- Size38–40 mm (1.50–1.57 in)
- ConnectionAnchor-rod connection; exact standard not stated
45mm Threaded Reaming Bit for Well Workover
- Size45 mm (1.77 in)
- ConnectionThread 45; exact standard requires confirmation
6–12in Insert Tricone Bit for Water and Oil Wells
- Size6–12 in (152.4–304.8 mm)
- IADC447
